Swing barrier product description
Swing barrier product description
Swing gate product introduction
One .Swing barrier picture
Two. Bridge swing gate installation diagram
Installation matters:
1. Place them in the order of the machine number, numbered on the same side,
2. The distance between each two machines is two swing arm lengths plus 50MM spacing. After the machine is placed, the expansion screws are pre-embedded and then fixed.
3. The embedded conduit is 300MM from the edge of the chassis.
4. Under each machine, lay two tubes L1, L2, one for the power cord, one for the network, one for the read head, and one for each channel (the factory has been configured); Manual button line, add a 3-core cable to pre-bury two 6-pipe;
Third, the bridge swing gate product description
1. Equipment introduction
The shape of Tongda Zhishang Gate is stamped and formed by domestic standard (No. 304) stainless steel plate. It is beautiful in appearance, rust-proof and durable, and can resist external damage. The rectangular chassis and the channel gate constitute a channel for the entry and exit personnel to provide an orderly and civilized way to prevent illegal access and quickly control the shrinking shutter in an emergency. The product has fine processing, complete functions and high grade. It is mainly used in intelligent buildings, hotels, high-end parks, scenic spots, playgrounds, residential areas, subways, docks, clubs and other places.
The swing gate organically integrates mechanical, electronic, microprocessor control and various identification technologies to facilitate the use of identification devices such as IC cards, ID cards, barcode platforms, fingerprints, faces, etc. Identify system equipment and use reliable safety protection devices, alarm devices, direction indications, etc., coordinate and realize intelligent control and management of channels.
Divided into: single movement: for single channel and multi-channel; double movement: for multiple channels, as shown: two movements are single movement, the middle is double movement
2, main functions and features
2.1 Standard product features:
1) It has fault self-test and alarm prompt function, which is convenient for users to maintain and use;
2) Program the operating status of the device through the built-in small push panel on the main control board;
3) Mechanical structure and induction double anti-pinch function, when the telescopic arm is in the process of resetting, it will stop automatically or the motor will stop working in the default time. After the default delay, it will be reset again (until reset), and the force is very small. (≤2Kg);
4) Sound and light alarm function: including illegal intrusion and trailing alarm;
5) Anti-shock function, the swing arm is automatically locked when the opening signal is not received;
6) telescopic arm synchronization function;
7) With automatic reset function, the system will automatically cancel the user's permission for the passage when the switch is not open within the specified time. The standard is automatically reset after 5 seconds after the start;
8) After the power is cut off, the channel is automatically opened, and the power is automatically closed;
9) It can be connected with a variety of card reading devices to receive relay switch signals;
10) One-way or two-way control of personnel entering and leaving;
11) Remote control and management can be realized directly through the management computer;
2.2 Scalable features:
1) counting function;
2) The chassis is lengthened and the swing arm material is selected.
3. Main structure and configuration
1) Standard chassis 1
2) swing arm 1
3) Main control board 1 block
4) Transformer 1
5) Motor 1
6) Movement and transmission part 1 set
7) Alarm (light) 1
8) Direction indicator board 1 block
9) Card reader window: 2
10) Infrared radiation 2---6 pairs,
Remark: In addition to the above configuration, the anti-collision swing gate needs to add one more clutch, one encoder
4, technical parameters
1) Chassis size: bridge swing gate 1200 length * 280 width * 1000 height (MM) (optional chassis lengthening)
Vertical swing gate 420 long * 330 wide * 1000 high (MM)
2) Swing arm length: 600-900mm
3) Channel width: 600----1900mm
4) Weight: 70Kg / Taiwan
5) Chassis material: GB (304) stainless steel, cover 1.5MM, case 1.2MM (optional material thickening)
6) Drive motor: DC motor (24V)
7) Input interface: Switch signal or 12V level signal or 12V pulse signal with pulse width >100ms, drive current >10mA
8) Normal service life: 5 million times
9) Communication interface: RS485 standard
10) LED indicator: 1
11) Card reader window: 2
12) Inspection port: 2
13) Passing speed: 30-40 people/minute
14) Gate opening and closing time: 1 second
15) Time required to enter the traffic state after power-on: 3 seconds
16) Automatic reset time after failure: 10 seconds
17) Working environment:
Indoor, outdoor (shade)
Temperature: -10 ° C - 50 ° C
Relative humidity: ≤90%, no condensation
Fourth, swing gate adaptation site
◆Office space: business buildings, government agencies, etc.;
◆Science and education units: institutions, research institutes, libraries, etc.;
◆ Commercial service places: supermarkets, shopping malls, hotels, clubs, banks, etc.;
◆ Leisure and entertainment places: parks, scenic spots, playgrounds, etc.;
◆ Transportation stations: bus stations, railway stations, subway stations, airports, etc.
V. Project case
