The introduction of flap barrier
Flap barrier introduction
One bridge style flap barrier installation diagram
Installation matters:
1. Place flap barrier in the order of the machine number, numbered on the same side,
2. The distance between each two machines is 550MM. After the machine is placed, the expansion screws are pre-embedded and then fixed.
3. The embedded conduit is 300MM from the edge of the chassis.
4. Under each machine, lay two tubes L1, L2, one for the power cord, one for the network, one for the read head, and one for each channel (the factory has been configured); Manual button line, add a 3-core cable.
Bridge style flap introduction:
Equipment brief introduction
Intelligent wing gate (block) is a high-tech product mainly for intelligent management of personnel passages. It is an upgraded product of intelligent three-roll gate and swing gate. This product has fine processing, complete functions and high grade. It is mainly used for high-end residential and intelligent. High-end places such as buildings, hotels, subways, docks, clubs, etc.
Flap barrier integrates mechanical, electronic, microprocessor control and various identification technologies into one body, which facilitates the integration of IC card, ID card, barcode platform, fingerprint, face and other identification devices on the device. Various identification system equipments and reliable safety protection devices, alarm devices, direction indications, etc., coordinate and realize intelligent control and management of channels.
Including single movment and double movment :Single movement: for single and multi-channel; double movement: for multiple channels, as shown: two movements on one side and two movements on the middle
2, main functions and features
2.1 Standard product features:
1) It has fault self-test and alarm prompt function, which is convenient for users to maintain and use;
2) Program the operating status of the device through the built-in small push panel on the main control board;
3) Mechanical structure and induction double anti-pinch function, when the telescopic arm is in the process of resetting, it will stop automatically or the motor will stop working in the default time. After the default delay, it will be reset again (until reset), and the force is very small. (≤2Kg);
4) Sound and light alarm function: including illegal intrusion and trailing alarm;
5) Anti-shock function, the swing arm is automatically locked when the opening signal is not received;
6) telescopic arm synchronization function;
7) With automatic reset function, the system will automatically cancel the user's permission for the passage when the switch is not open within the specified time. The standard is automatically reset after 5 seconds after the start;
8) After the power is cut off, the channel is automatically opened, and the power is automatically closed;
9) It can be connected with a variety of card reading devices to receive relay switch signals;
10) One-way or two-way control of personnel entering and leaving;
11) Remote control and management can be realized directly through the management computer;
2.2 Scalable features:
1) counting function;
2) The chassis is lengthened and the telescopic arm material is selected;
3) Counting function: It can increase the number of counters in and out.
3. Main structure and configuration of flap barrier gate
1) Standard chassis 1
2) Gate 1
3) Main control board 1 block
4) Transformer 1
5) Motor 1
6) Movement and transmission part 1 set
7) Infrared radiation 3 pairs, optional increase
8) Alarm (light) 1
9) Direction indicator board 3 blocks
4, wing brake technical parameters
1) Chassis size: 1200 length * 300 width * 1000 height (MM) (optional chassis lengthening)
2) Telescopic arm length: 250mm
3) Maximum channel width: 600mm
4) Weight: 65Kg / Taiwan
5) Chassis material: GB (304) stainless steel, cover 1.5MM, case 1.2MM (optional material thickening)
6) Drive motor: DC motor (24V)
7) Input interface: Switch signal or 12V level signal or 12V pulse signal with pulse width >100ms, drive current >10mA
8) Normal service life: 5 million times
9) Communication interface: RS485 standard
10) LED indicator: 6
11) Card reader window: 4
12) Inspection port: 4
13) Passing speed: 30-40 people/minute
14) Gate opening and closing time: 1 second
15) Time required to enter the traffic state after power-on: 3 seconds
16) Automatic reset time after failure: 10 seconds
17) Working environment:
Indoor, outdoor (shade)
Temperature: -10 ° C - 50 ° C
Relative humidity: ≤90%, no condensation
Third, the wing gate adaptation site:
◆Office space: business buildings, government agencies, etc.;
◆Science and education units: institutions, research institutes, libraries, etc.;
◆ Commercial service places: supermarkets, shopping malls, hotels, clubs, banks, etc.;
◆ Leisure and entertainment places: parks, scenic spots, playgrounds, etc.;
◆ Transportation stations: bus stations, railway stations, subway stations, airports, etc.
